|
|
|
|
|
Miller - Spectrum 2050 Plasma Cutter W/25 ft Ice-55C
|
|
|
|
903777012
|
|
|
|
Miller - Spectrum 2050 Plasma Cutter W/25 ft Ice-55C
Features
Auto-Line™ Power Management technology automatically links unit to any primary voltage from 208 to 575 volts, single- or three-phase, 50 or 60 Hz.
LVC™ line voltage compensation provides peak performance power under variable input voltage conditions (176-264 V) for steady cuts and cleaner end cuts.
Fan-On-Demand™ cooling system only operates when needed, reducing the amount of airborne dust/dirt pulled through the unit.
Wind Tunnel Technology™ prevents abrasive dust and particles from damaging internal components.
Can be powered by any Miller welding generator with power output of 8 KW or more, such as the Bobcat™ or Trailblazer®, or equivalent competitive equipment.
Power Factor Correction (PFC) uses input power more efficienctly, ultimately using less energy.
Starts without high-frequency so it will not interfere with or damage controls or computer.
Air Plasma Cutting and Gouging (PAC) Watch Miller plasma cutting and gouging in action!
Heavy Industrial Applications Construction Maintenance and Repair Fabrication
Cutting Capability Rated: 7/8 in (22mm) Quality: 1 in (25 mm) Sever: 1-1/4 in (32 mm)
Rated Output at 104° F (40°C) 55 A at 110 VDC, 50% Duty Cycle, 1-phase 55 A at 110 VDC, 60% Duty Cycle, 3-phase
Plasma Gas Flow/Pressure 6.0 CFM (172 L/min) at 70 PSI (483 kPa)
Net Weight with torch: 86 lb (39 kg)
Plasma cutter ICE-55C hand-held torch with 25 ft (7.6 m) or 50 ft (15.2 m) cable, or ICE-55CM machine-held torch with 50 ft (15.2 m) cable. Heavy-Duty work clamp with 25 ft(7.6 m) or 50 ft(15.2 m) cable. 10 ft (3 m) power cord Extra consumables.
Cutting Capability
•Rated: 7/8 in (22mm)
•Quality: 1 in (25 mm)
•Sever: 1-1/4 in (32 mm)
Input Power
•208 - 575 V 1 or 3 Phase
Input Amperage Circuit Requirement
•A 230 volt, single-phase 40 amp (min.) individual branch circuit. Three phase requirements vary based on input voltage.
Compressor Requirement
•6 CFM (170 L/min.) at 100 PSI (689 kPa)
Rated Output at 104° F (40°C)
•55 A at 110 VDC, 50% Duty Cycle, 1-phase
•55 A at 110 VDC, 60% Duty Cycle, 3-phase
Net Weight with Torch
•86 lb (39 kg)
|
|
|
|
Plasma Cutters, Miller, Electric, Welding Machines, Welders
|
|
|
|
|
|
|
|
|
|
